- #IVIDEO JAPAN WIFI HOW TO#
- #IVIDEO JAPAN WIFI ANDROID#
- #IVIDEO JAPAN WIFI PASSWORD#
Make sure that the Video Switching & Wall Control app is installed on your device. To connect to the ST12MHDLANU network on a device running Android 5.1.1 (Lollipop) or Cyanogen 12.0, do the following: To connect to the network for the ST12MHDLANU, you need to connect your mobile device to the network. Depending on the version of the Android operating system that you are running, you many need to manually create a wireless network with a static IP address or assign an IP address for an existing wireless connection. #IVIDEO JAPAN WIFI ANDROID#
In the VLAN settings, do the following:Ĭonnect your Android device to the network.In IGMP Snooping, click VLAN Configuration.In the Port Related Configuration settings, do the following:.Select the Leave Proxy Enabled check box.In the IGMP SSM Range field, type 232.0.0.0 /8.Select the Unregistered IPMCv4 Flooding Enabled check box.
In the Global Configuration settings, do the following:.To access the IGMP Snooping Configuration screen, click Configuration > IPMC > IGMP Snooping > Basic Configuration.
#IVIDEO JAPAN WIFI PASSWORD#
The default login is Username = admin, Password =. Use your web browser to navigate to 192.168.2.1.To configure the IGMP on the switch, complete the following:
#IVIDEO JAPAN WIFI HOW TO#
For more information on how to change your IP address, refer to the following FAQ.
Make sure that your computer's network adapter is on the same network as the network switch (by default, 192.168.2.XXX). Use an Ethernet cable to connect a computer to one of the ports. To access the configuration settings for the switch, complete the following: Note: The following instructions are based on the default configuration for the IES101002SFP switch. When all of the units are powered on and the HDMI sources are transmitting video, there should be mirrored images from source A displayed on the monitors. Set the thumbwheel to B on the remaining transmitter. Set the thumbwheel to A on all of the receivers. Set the thumbwheel to A on one transmitter. Use the HDMI cables to connect the HDMI sources to the transmitters. Use the HDMI cables to connect the receivers to the displays. Connect the IES101002SPF to the rest of the network. Use the Ethernet cables to connect the transmitters and receivers to the IES101002SPF. 
A mobile device that is running Android™ or iOS ®, and has the Video Switching & Wall Control app installed on it. A computer that is connected by wired Ethernet. 
Two HDMI sources (for example, computers).The following is a list of the hardware components used in the example setup: The information contained in the example can be applied to setups with multiple switches, receivers, and transmitters.
The following example describes how to create a 2 x 2 video wall that uses two video inputs. A layer two managed Gigabit Ethernet switch () is recommended for use in video wall setups. For more information about why a managed switch is required, visit. Note: The video wall cannot be created with switches that are not managed.
Make sure that your mobile device is connected to the same network as the ST12MHDLANU. Use a wireless network infrastructure (for example, a wireless access point) in conjunction with a managed switch. Use multiple receivers (for example, ST12MHDLANUR) in conjunction with multiple transmitters to create the video wall. Obtain the Video Switching & Wall Control app from the Google Play™ store or the App Store. To create a video wall with ST12MHDLANU, do the following:
0 kommentar(er)
